|
|
|
| |
| Low-Profile Encapsulated Transformer Features |
The OB Range is mounted in resin-filled, flat thermoplastic cases and designed to be through-hole soldered direct to PCB's. Four screws using holes molded in the corners of the case can supplement mechanical fixing.
The non-concentric twin primary and secondary windings are wound on separate bobbins, which gives maximum isolation and low inter-winding capacitance.
The flat height profile allows for close spacing between boards.
Features and benefits include:
- International Certifications
- Low Profile
- PCB Mounted
- Resin filled under vacuum
- 5KV AC flash test
- Custom designs available
- Industry Standard
- High reliability
|
| |
| General Specifications |
- Primary Volts: 120/240 or 115/230
- Frequency: 50/60 Hz
- Maximum ambient temperature: 40 C
- Secondary voltage tolerance: within 5% at nominal input and full load
- Flash Tested: 5kV AC
- Certifications: VDE 0551, VDE
0570, IEC 742, EN60 742, EN61 558, UL 506, CSA C22.2,
SEV 1003, CE Marked
- EN 60-950 available on request
- Available in
self-extinguishing materials to UL 94V-0
- Available with short circuit
protection (FLD Range)
|
| |
| Additional
Specifications and Information |
|
|
|
|
Detailed
Specifications (Standard Range)
|
|
Mechanical
Drawings
|
|
|
Transformer Connections
|
|
Download Datasheet
|
|
|
|
